What size dumpster for a roof tear-off?

A 10 yard heavy-debris container handles roughly 15 to 20 squares. Larger roofs or double layers usually need a 15 or 20 yard.

Do roofing dumpsters have lower volume limits?

Often yes. Haulers may ask that a container be filled only partway so the loaded truck stays within legal axle weight.

Roofing Dumpsters for Tear-Offs in Florida

Shingles are dense. A single square of asphalt shingles weighs roughly 250 pounds, and a second layer doubles that. Roofing loads are almost always limited by weight rather than volume.

Check Availability & Get Pricing

Enter your ZIP code and project details so local dumpster availability and pricing can be checked for your area. No obligation.

1. ZIP Code
2. Project
3. Contact

Recommended Dumpster Sizes

10 Yard Dumpster
About 12 ft long x 8 ft wide x 3.5 ft high
approximately $300-$500
15 Yard Dumpster
About 14 ft long x 8 ft wide x 4 ft high
approximately $350-$550
20 Yard Dumpster
About 22 ft long x 8 ft wide x 4.5 ft high
approximately $400-$650

Materials

Commonly accepted

Asphalt and architectural shingles
Underlayment and felt
Roof decking and nails
Tile roofing when the hauler accepts heavy debris

Restricted or prohibited

Roofing material containing asbestos
Mixing shingles with household junk when the load is priced as clean roofing

Full accepted materials guide

Loading and Planning Tips

Estimate about one ton per 10 squares of single-layer asphalt shingles.
Ask for a clean-load rate; shingle-only loads are sometimes cheaper to dispose of.
Rain-soaked shingles gain significant weight, so tarp the container overnight.

Planning a Roofing Container in Florida

Sizing by roof area and material

Shingle tear-off is dense, so weight decides the size. A small tear-off often fits a 10 yard, mid-size jobs a 15 or 20 yard, and larger or multi-layer roofs typically need a 20 or 30 yard with the tonnage confirmed in advance. Tile roofs are heavier again and should be discussed before delivery.

Weight limits and layers

A second or third layer of shingles multiplies the tonnage without changing the roof's square footage. Overage is billed per ton, so the number of layers is worth counting before the container size is chosen.

Placement close to the work

Roofing crews load from height, so the container is normally placed alongside the slope being stripped, on a protected driveway surface. Board or plywood under the rails helps protect pavers and asphalt, and the surrounding area should be kept clear for nail cleanup.

Materials to keep out

Shingles, underlayment and roofing felt are standard. Keep out separate waste streams such as paint, solvents and refrigerant-containing equipment, since a contaminated load can be rejected and require a return trip.

Florida pricing guide Permit requirements Contractor dumpster rental Commercial roll-off rental Check local availability

Roofing Dumpster FAQ

What size dumpster for a roof tear-off?: A 10 yard heavy-debris container handles roughly 15 to 20 squares. Larger roofs or double layers usually need a 15 or 20 yard.
Do roofing dumpsters have lower volume limits?: Often yes. Haulers may ask that a container be filled only partway so the loaded truck stays within legal axle weight.